Best Ways to Clean and Vacuum your Pool

If you have a swimming pool in your backyard, you might want to save some money by cleaning it by yourself. Of course, it takes a lot of work and time to clean it and you will need to monitor the chemical level at least two or three times per week. However, it will be worth it since you will keep your pool safe and clean. In this article, you will be able to read about how to clean and vacuum your pool. Let’s take a look:

Brushing and Skimming

source: certifiedpoolpros.com

Before you start brushing and skimming, make sure that you have the right supplies. You should have a telescopic pole since most cleaning supplies are attached to a pole like this one, hence, having one will make the process easier. A leaf skimmer is also an important tool that you should have. This is a small net that you should connect to the telescopic pole. You can use it to remove debris or leaves from the surface of the pool. Also, make sure that you buy a pool brush. This is a tool used for cleaning the sides, steps, and ladders of the pool.

Vacuuming

source: pooluniversity.org

A pool vacuum can be used to clean the floors of a pool. There are various types of and your choice will depend on your needs and the size and type of the pool. Automatic cleans come in three types. Suction side vacuums are not recommended since they suck things such as rock, which can damage the filtration system. Pressure side vacuums are connected to the return jet of the filtration system and work by removing debris from the water. The best vacuum that you could get is the robotic pool vacuum. These robots ill drive around the bottom and collect debris. If you want to see some of the best vacuums for your pool, visit https://allgreatvacuums.com/

Managing the Chemical

source: iscalabama.org

The first thing you should do is to check the pH levels of the water. Various chemicals can help with keeping a pool clean. Keep in mind that the use of the pool and the weather can affect the chemical level in the water, hence, you should test the pH levels at least 2 to 3 times every week. You will need to do it often to make sure the pool is safe for swimming. There are various pH testers that you can find at a supermarket. Before opting for one brand, read some reviews and recommendations of other people before buying a tester. The pH levels should be around 7.2 and 7.6. If it does not meet these numbers, you should use a pH increaser or a pH reducer.

Check the filter and do not forget to add sanitizing chlorine tablets 

source: stuffoholics.com

Do not forget to check and clean the pool’s filter. The area around it should be free of grime and debris. Make sure that you check it often and remove anything that might be clogging it. You can order these tablets online or buy them at hardware stores. These tablets will dissolve slowly and will release chlorine that will destroy harmful bacteria in the water. Read the instructions on the label to see how much tablets you should add to the water and also add them to your floater, skimmer, or vacuum to make sure these tools are clean as well.

Conclusion 

As you can see, it is not that difficult to clean a pool. Keep in mind that you should clean your pool regularly to avoid it being too dirty. 

 

Leave a Reply

Your email address will not be published. Required fields are marked *